ioMirror E3210

Ethernet Peer-to-Peer I/O with 8 digital inputs and 8 digital outputs

Direct input-to-output signal communication over IP
High speed Peer-to-Peer I/O within 20 ms
One physical alarm port for connectivity status
Quick and easy utility and web-based settings
Local alarm channel
Remote alarm message
Supports Modbus/TCP for remote monitoring
Optional LCD module for simple setting

ioMirror E3000 Ethernet I/O products are designed as a cablereplacement solution that connects remote digital input signals to output signals over an IP network. The ioMirror E3210 provides 8 digital input channels, 8 digital output channels, and a 10/100M Ethernet interface. Up to 8 pairs of digital input and output signals can be exchanged over Ethernet with another ioMirror E3210, or can be sent to a local PLC or DCS controller. Over a local area network, the ioMirror can achieve a low signal latency (typically less than 20 ms). With ioMirror, remote sensors can now be connected to local controllers or display panels over copper, fiber, or wireless Ethernet infrastructures. Signals can be transmitted over virtually unlimited distances, without noise problems.

• Inputs and Outputs
Digital Inputs	8 channels
Digital Outputs	8 channels
Alarm Port Output	1 channel
• Digital Input
Sensor Type	Wet Contact (NPN), Dry Contact
I/O Mode	Digital Input
Dry Contact	• On: short to GND • Off: open
Wet Contact (source type)	• On: 0 to 3 VDC • Off: 10 to 30 VDC
Common Type	8 points per COM
Isolation	3K VDC or 2K Vrms
Digital Filtering Time Interval	Software selectable
Over-voltage Protection	36 VDC
• Digital Output
Type	Sink
I/O Mode	Digital Output
Over-voltage Protection	45 VDC
Over-current Protection	2.6 A (4 channels @ 650 mA)
Over-temperature Shutdown	160°C
Current Rating	200 mA per channel
Isolation	3K VDC or 2K Vrms
• Alarm Port Output
Current Rating	200 mA per channel
Isolation	3K VDC or 2K Vrms
• LAN
Ethernet	1 x 10/100 Mbps, RJ45
Protection	1.5 KV magnetic isolation
Protocols	Modbus/TCP, TCP/IP, UDP, DHCP, Bootp, HTTP, SNTP
• Power Requirements
Power Input	24 VDC nominal, 12 to 48 VDC
DO Power	24 VDC nominal, up to 45 VDC
Power Consumption	136 mA @ 24 VDC
• Physical Characteristics
Wiring	I/O cable max. 14 AWG
Dimensions	115 x 79 x 45.6 mm (4.53 x 3.11 x 1.80 in)
Weight	205 g
• Environmental Limits
Operating Temperature	-10 to 60°C (14 to 140°F)
Storage Temperature	-40 to 85°C (-40 to 185°F)
Ambient Relative Humidity	5 to 95% (non-condensing)
• Standards and Certifications
Safety	UL 508
EMI	FCC Part 15 Subpart B Class A, EN 55022 Class A
EMS	IEC 61000-4, IEC 61000-6
Shock	IEC 60068-2-27
Freefall	IEC 60068-2-32
Vibration	IEC 60068-2-6
• Warranty
Warranty Period	5 years

MOXA IoMIRROR ETHERNET PEER-TO-PEER

MOXA IoMIRROR ETHERNET PEER-TO-PEER