ioLogik E1214

Ethernet Remote I/O with 2-port Ethernet switch, 6 DIs, and 6 Relays

Built-in 2-port Ethernet switch for daisy-chain topologies
Free support of Moxa’s push-based Active OPC Server Lite
- Seamlessly connect to any SCADA system
- Save 80% on network bandwidth
- I/O response that’s seven times faster
User-defined Modbus/TCP addressing
I/O peer-to-peer function
MXIO programming library for Windows and WinCE VB/VC.NET and Linux C APIs
Web configuration with Import/Export function

A new daisy-chained Ethernet I/O concept is now available. The ioLogik E1214 industrial Ethernet remote I/O has two embedded Ethernet switch ports that allow information to flow to another local Ethernet device or connect to the next ioLogik in the daisy-chain. Applications such as factory automation, security and surveillance systems, and tunnel monitoring, can make use of daisy-chained Ethernet for building multi-drop I/O networks over standard Ethernet cables. Many industrial automation users are familiar with the multi-drop configuration typically used in fieldbus applications. The daisy-chain function on the Ethernet remote I/O ioLogik E1214 not only increases the connection between machines and panels, but also lowers the cost of buying separate Ethernet switches, and at the same time reduces labor fees and cabling by a large percentage. For example, if a production facility contains 700 stations (20 points per station), the wiring cost reduction can reach 15% of the total implementation cost.

• Inputs and Outputs
Digital Inputs	6 channels
Relay Outputs	6 channels
• Digital Input
Sensor Type	Wet Contact (NPN or PNP), Dry Contact
I/O Mode	DI or Event Counter
Dry Contact	• On: short to GND • Off: open
Wet Contact	• On: 0 to 3 VDC • Off: 10 to 30 VDC
Isolation	3K VDC or 2K Vrms
Counter Frequency	250 Hz, power off storage
• Relay Output
Type	Form A (N.O.) relay outputs, 5A
Contact Rating	5 A @ 30 VDC, 5 A @ 250 VAC, 5 A @ 110 VAC
Inductance Load	2 A
Resistance Load	5 A
Breakdown Voltage	500 VAC
Relay On/Off Time	1500 ms (Max.)
Initial Insulation Resistance	1G min. @ 500 VDC
Expected Life	100,000 times (Typical)
Initial Contact Resistance	30 milli-ohms (Max.)
Pulse Output	0.3 Hz at rated load
• LAN
Ethernet	2 x 10/100 Mbps switch ports, RJ45
Protection	1.5 KV magnetic isolation
Protocols	Modbus/TCP, TCP/IP, UDP, DHCP, Bootp, HTTP
• Power Requirements
Power Input	24 VDC nominal, 12 to 36 VDC
Power Consumption	188 mA @ 24 VDC
• Physical Characteristics
Wiring	I/O cable max. 14 AWG
Dimensions	27.8 x 124 x 84 mm (1.09 x 4.88 x 3.31 in)
Weight	under 200 g
• Environmental Limits
Operating Temperature	Standard Models: -10 to 60°C (14 to 140°F) Wide Temp. Models: -40 to 75°C (-40 to 167°F)
Storage Temperature	-40 to 85°C (-40 to 185°F)
Ambient Relative Humidity	5 to 95% (non-condensing)
• Standards and Certifications
Safety	UL 508
EMI	FCC Part 15 Subpart B Class A
EMS	IEC 61000-4, IEC 61000-6
Shock	IEC 60068-2-27
Freefall	IEC 60068-2-32
Vibration	IEC 60068-2-6
• MTBF (mean time between failures)
Time	808,744 hrs
Database	Telcordia (Bellcore)
• Warranty
Warranty Period	2 years

MOXA IOLOGIK E1214

MOXA IOLOGIK E1214