MOXA FIBER MEDIA CONVERTER, MULTI-M
|
|
MOXA FIBER MEDIA CONVERTER, MULTI-M
-
Produkt
Mediekonverterere
|
Beskrivelse
Spesifikasjoner
TCF-142 Series
RS-232/422/485 to optical fiber media converters
Features and Benefits
- “Ring” and “Point-to-Point” transmission
- Extends RS-232/422/485 transmission up to:
- 40 km with single-mode—TCF-142-S
- 5 km with multi-mode—TCF-142-M
- Compact size
- Decreases signal interference
- Protects against electrical interference and chemical corrosion
- Supports baudrates of 50 bps to 921.6 Kbps
- Wide temperature models available (-40 to 75°C)
Introduction
The TCF-142 media converter is equipped with a multiple interface circuit that can handle RS-232 or RS-422/485 serial interfaces and multi-mode or single-mode fiber. TCF-142 converters are used to extend serial transmission up to 5 km (TCF-142-M with multi-mode fiber) or up to 40 km (TCF-142-S with single-mode fiber). The TCF-142 can be configured to convert either RS-232 signals, or RS-422/485 signals, but not both at the same time.
Automatic Baudrate Detection
The TCF-142 can automatically detect the serial baudrate. This is an extremely convenient feature. Even if a device’s baudrate is changed, the signal will still be transmitted through the media converter without any data loss.
Ring Operation
The TCF-142 can be used to connect serial devices to a fiber ring. To form the ring, connect the Tx port of one TCF-142 to the Rx port of a neighboring converter. Once the ring is set up, simply use the DIP switches to configure the TCF-142 converters for “ring mode.” When one node transmits a signal, the signal travels around the ring until it returns back to the transmitting unit, which then blocks the signal. With the TCF-142, you can set up fiber rings that have a total circumference of up to 100 km.
Automatic Data Direction Control (ADDC®)
ADDC® is a patented hardware data flow solution developed by Moxa to handle RS-485 data direction control. ADDC® senses and controls RS-485 data direction automatically, making it unnecessary to use the hand shaking signal.
| • RS-232/422/485 Side |
| Connector(s) |
Terminal Block |
| RS-232 Signals |
Tx, Rx, GND |
| RS-422 Signals |
TxD+, TxD-, RxD+, RxD-, GND |
| RS-485-4w Signals |
TxD+, TxD-, RxD+, RxD-, GND |
| RS-485-2w Signals |
Data+, Data-, GND |
| Baudrate |
50 bps to 921.6 Kbps |
| ESD Protection |
15 KV for all signals |
| • Optical Fiber |
| Fiber Connector |
SC or ST |
| Cable Requirements |
Single-mode: 8.3/125, 8.7/125, 9/125, or 10/125 μm
Multi-mode: 50/125, 62.5/125, or 100/140 μm |
| Transmission Distance |
Single-mode: 40 km
Multi-mode: 5 km |
| Wavelength |
Single-mode: 1310 nm
Multi-mode: 850 nm |
| Tx Output |
Single-mode: > -5 dBm
Multi-mode: > -5 dBm |
| RX Sensitivity |
Single-mode: -25 dBm
Multi-mode: -20 dBm |
| Point-to-Point Transmission |
Half-duplex or full-duplex |
| Ring Transmission |
Half-duplex |
| • Physical Characteristics |
| Enclosure |
Aluminum (1 mm) |
| Dimensions |
Without ears: 67 x 100 x 22 mm (2.64 x 3.94 x 0.87 in)
With ears: 90 x 100 x 22 mm (3.54 x 3.94 x 0.87 in) |
| • Environmental Limits |
| Operating Temperature |
Standard Models: 0 to 60°C (32 to 140°F)
Wide Temp. Models: -40 to 75°C (-40 to 167°F) |
| Operating Humidity |
5 to 95% RH |
| Storage Temperature |
-40 to 85°C (-40 to 185°F) |
| • Power Requirements |
| Input Voltage |
12 to 48 VDC |
| Power Consumption |
140 mA @ 12 V |
| Voltage Reversal Protection |
Protects against V+/V- reversal |
| Power Line Protection |
2 KV Burst (EFT), EN61000-4-4
2 KV Surge, EN61000-4-5 |
| Over Current Protection |
1.1 A (protects against two signals shorted together) |
| • Regulatory Approvals |
| EMI |
EN55022 1998, Class B |
| EMS |
EN61000-4-2 (ESD), Criteria A, Level 2
EN61000-4-3 (RS), Criteria A, Level 2
EN61000-4-4 (EFT), Criteria A, Level 2
EN61000-4-5 (Surge), Criteria A, Level 3
EN61000-4-6 (CS), Criteria A, Level 2
EN61000-4-11(DIPS), Criteria A, Level 2 |
| UL/CUL |
UL60950-1 |
| TUV |
EN60950-1 |
| FCC |
Part 15 Subclass B |
| • Warranty |
| Warranty Period |
5 years |
| |
Model No. |
Description |
|
|
|
|
|
TCF-142-M-SC |
RS-232/422/485 to multi-mode optical fiber media converter with fiber ring support and SC connector |
|
|
|
|
|
TCF-142-M-ST |
RS-232/422/485 to multi-mode optical fiber media converter with fiber ring support and ST connector |
|
|
|
|
|
TCF-142-S-SC |
RS-232/422/485 to single-mode optical fiber media converter with fiber ring support and SC connector |
|
|
|
|
|
TCF-142-S-ST |
RS-232/422/485 to single-mode optical fiber media converter with fiber ring support and ST connector |
|
|
|
|
|
TCF-142-M-SC-T |
RS-232/422/485 to multi-mode optical fiber media converter with fiber ring support and SC connector, -40 to 75°C temperature range |
|
|
|
|
|
TCF-142-M-ST-T |
RS-232/422/485 to multi-mode optical fiber media converter with fiber ring support and ST connector, -40 to 75°C temperature range |
|
|
|
|
|
TCF-142-S-SC-T |
RS-232/422/485 to single-mode optical fiber media converter with fiber ring support and SC connector, -40 to 75°C temperature range |
|
|
|
|
|
TCF-142-S-ST-T |
RS-232/422/485 to single-mode optical fiber media converter with fiber ring support and ST connector, -40 to 75°C temperature range |
|
|
|
|
| Vertsgrensesnitt | RS-232/422/485 |
| Utgangsgrensesnitt | Fiber (SC) |
| RS-232-signaler | GND,Rx,Tx |
| Overstrømsbeskyttelse | Ja |
| Overspenningsvern | 2 kV |
| Elektrostatisk utladning (ESD) beskyttelse | 15 kV |
| Fiberoptisk kontakt | SC |
| Overføringsavstand (multi-modus) | 5 km |
| Bølgelengde | 850 nm |
| RS-422-signaler | RxD+,RxD-,SGND,TxD+,TxD- |
| RS-485-signaler | Data+,Data-,RxD+,RxD-,SGND,TxD+,TxD- |
| RX-sensitivitet | -20 dB |
| TX-utgang | -5 dB |
| Baud-hastighet | 921,6 Kbit/s |
| Driftstemperaturområde | -40 - 75 °C |
| Oppbevaringstemperaturomåde (Celsius) | -40 - 85 °C |
| Luftfuktighetsområde ved drift | 5 - 95% |
| Fysiske mål (BxDxH) | 67 x 100 x 22 mm |
| Inngangsstrøm | 12 - 48 V |
| Strømforbruk | 140 mA |
| ISV-sertifiseringer | EN, FCC |
| Sikkerhet | UL/CUL, TUV |
| LED-indikatorer for kommunikasjon | Ja |
Selv om vi gjør vårt beste for å gi relevant informasjon, så er bildene kun for å gi et
generelt inntrykk, og selve varen er ikke nødvendigvis akkurat slik som avbildet. Dersom det er
forskjeller mellom produktoverskrift, beskrivelse og bilde, så er det produktoverskriften som
gjelder (f.eks. PCer kommer ikke nødvendigvis med skjerm selv om bildet viser det). Hvis noe er
uklart, vennligst send epost til kundestøtte før du bestiller. Vi tar forbehold om trykkfeil og endring av priser og spesifikasjoner uten varsel.